Can seamer F08
For aluminium beverage cans as well as steel and plastic applications. Capacity range of 19'800 to 60'000 cans per hour.
Features
- Entire seaming area in stainless steel
- Quick changeover system for a quick format change
- Automatic speed-dependent undercover gas flow regulation
- Utility tower for shutting off media and power flow
- Increased precision for applications with light-weight cans and end material
- Easy operation and cleaning
- Minimal effort required for maintenance
- 24-hour non-stop operation
- Maximum safety for the operating personnel"
Technical data
| Seaming stations | 8 | |
| Cans per minute | 330-1000 | |
| Cans per hour | 19'800-60'000 | |
| Can diameter | 50-73 mm | 200-300 Imp |
| Can height | 88-212 mm | 200-805 Imp |
| Chain pitch | 95.3 / 104.8 mm | 3.75 / 4.12 inch |
| Compressed air | 5.5-10 bar | 80-145 psi |
| Compressed air consumption | 1 Nm³/h | 35 cu ft/h |
| Main drive | 15 kW | 20 HP |
| Net weight approx. | 3400 kg | 7500 lbs |
Equipment F08
The can seamer F08 is equipped with the following standard features:
- Synchronized infeed table
- Quick changeover system for a quick format change
- Complete tool including seaming roll Easy Rider
- Undercover gassing automatically regulated
- Bubble breaker
- Disengageable seaming cam 2nd OP
- Electric oil pump with loss-free progressive centralized lubrication and oil flow monitor
- In-motion-timer, manual
- Slow motion, manual
- Motorized can height adjustment with digital display
- End feed
- Filler drive with overload clutch
- Chain drive with spring clutch
- Air treatment unit (compressed air system)
- Can discharge table incl. discharge turret and deflection wheel
Your contact person
Find the right contact person for your needs at Ferrum, our service centers, agencies and locations.
We look forward to hearing from you.
